manualshive.com logo in svg

Lightware UBEX Series, User Manual

The Lightware UBEX Series User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for efficiently utilizing the product's features and functions. Enhance your user experience and optimize your UBEX Series device by downloading the user manual from manualshive.com.

Share
Download
background image

 

8. Lightware Device Controller

 

UBEX series – Matrix Application Mode – User's Manual 

96

 

8. Lightware Device Controller

 

UBEX series – Matrix Application Mode – User's Manual 

96

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2

8.16.3. System Log Tab

System log tab in the MMU settings menu

All UBEX matrix related notifications are listed in the System log tab which are grouped in four categories: 

info, notice, warning, and error. The categories are summerized on the right side of the tab in the 

Summary

 

section. The list can be costumized by the 

Column Switchers

 by turning on or off the following columns: Time, 

Level, Identification, and Message.

All system log tracks can be saved to the control computer with the 

Export full system log

 button. 

#log

INFO: 

Please always download the system logs and send to the Lightware Support Team 

(

[email protected]

) for the most effective collaboration in the case of a troubleshooting issue.

8.16.4. System Tab

System tab in the MMU settings menu

The following functions are available under System tab:

 

▪

Factory defaults

 - recalling factory defaults settings and values for the MMU. All factory default settings 

are listed in the 

UBEX-MMU-X200

 section. 

#factory

 

▪

Download backup

 - saving the configuration backup file of the device. See the contents of the file in the 

UBEX-MMU-X200

 section. 

#backup

 

▪

Reboot device

 

–

Quick reset: the controller software of the MMU reboots, but the hardware of the unit does not 
reboot. 

#softreset

 

–

Reboot: the MMU reboots, it is the same like disconnecting the power source and reconnecting 
again. 

#reboot #restart #reset

INFO: 

The video signal transmission is 

not

 affected by any kind of rebooting of the MMU.

 

▪

Restore system settings

 - select a backup file of the MMU on your computer and select the 

Restore

 button 

to load it. The configuration settings saved in the file are applied immediately.

 

▪

Date / time settings

 - two options are available to set the date and time:

 

–

Set current date / time

 - system time can be set manually or can be synchronized with your control 

device. 

#time #date

 

–

NTP settings

: an NTP server address can be set and enable/disable the service to synchronize the 

date and time. 

#ntp

DEFINITION: 

The Network Time Protocol (NTP) is a networking protocol for clock synchronization 

between computer systems over packet-switched, variable-latency data networks.

 

 

Summary of Contents for UBEX Series










































































































































































































Reviews:

No comments

Related manuals for UBEX Series

Sunbeam PBT3000 User Manual preview
PBT3000
Brand: Sunbeam Pages: 30
Ebode IR Link Mini User Manual preview
IR Link Mini
Brand: Ebode Pages: 28
Bennett Read WBL-001H User Manual preview
WBL-001H
Brand: Bennett Read Pages: 8
Ninja BL642UK Owner'S Manual preview
BL642UK
Brand: Ninja Pages: 16
Globalmediapro HDV-E100 User Manual preview
HDV-E100
Brand: Globalmediapro Pages: 9
Avenview C5-USB-200 User Giude preview
C5-USB-200
Brand: Avenview Pages: 7
Oursson ENERGY BULLET BL1040G Instruction Manual preview
ENERGY BULLET BL1040G
Brand: Oursson Pages: 11
RAMTONS RM/580 Instruction Manual preview
RM/580
Brand: RAMTONS Pages: 7
WaveSplitter WST-PEX006 Operation Manual preview
WST-PEX006
Brand: WaveSplitter Pages: 5
zBoost DataBlast VLTE-AWS Setup Overview preview
DataBlast VLTE-AWS
Brand: zBoost Pages: 2
Thulos TH-BM1010 Manual preview
TH-BM1010
Brand: Thulos Pages: 17
Analog way EXT-DP12-OPT Quick Start Manual preview
EXT-DP12-OPT
Brand: Analog way Pages: 2
Concept2 TM5010 Manual preview
TM5010
Brand: Concept2 Pages: 69
KING Extend KX2000 User Manual preview
Extend KX2000
Brand: KING Pages: 16
Austin Hughes CyberView CV-K101 User Manual preview
CyberView CV-K101
Brand: Austin Hughes Pages: 12
Fantech DBF110 Installation Instructions Manual preview
DBF110
Brand: Fantech Pages: 12
Philips HR1365 Quick Start Manual preview
HR1365
Brand: Philips Pages: 9
Philips HR1361 Instruction Manual preview
HR1361
Brand: Philips Pages: 11

Brands by name

Popular brands

Load more brands