manualshive.com logo in svg

Lightware UBEX Series, User Manual

The Lightware UBEX Series User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for efficiently utilizing the product's features and functions. Enhance your user experience and optimize your UBEX Series device by downloading the user manual from manualshive.com.

Share
Download
background image

 

3. Installation 

UBEX series – Matrix Application Mode – User's Manual 

29

 

3. Installation 

UBEX series – Matrix Application Mode – User's Manual 

29

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2

3.4.3. F-series Endpoints - Transceiver Operation Mode

Connections for the F110 model in transceiver operation mode

Changing the Operation Mode

The operation mode of the UBEX endpoint device can be changed using the following methods.

Before

 connecting the device to the network and the MMU:

 

▪

via 

front panel LCD menu

;

After

 connecting the device to the network and the MMU:

 

▪

via 

Lightware Device Controller (LDC) software

 - see the details in the 

Device Map

 section;

 

▪

via 

LW3 protocol command

 - see the details in the 

Set the Operation Mode

 section.

For all F-series models

OPT

DAC

Connect singlemode or multimode (depends on the installed SFP+ modules) 

fiber optical cables or DAC cables between the transceiver and the Layer 3 (L3) 

network switch. The Matrix Mode is detected and applied automatically in the 

device once the MMU claims the endpoint.

HDMI in

Connect the transceiver and the source device (e.g. PC) using the HDMI input 2 

port by an HDMI cable.

HDMI out

Connect a sink device (e.g. monitor) to the HDMI output 1 port by an HDMI 

cable.

Local HDMI out

Connect a local sink device (e.g. 4K TV) to the HDMI output 2 port by an HDMI 

cable.

Ethernet

Optionally connect the transceiver to a LAN in order to control the device.

Power

Connect the power adaptor to the AC input on the transceiver first, then to the 

AC power socket.

For F110 model only

Audio in

Connect an audio source (e.g. media player) to the audio input connector.

Audio out

Connect an audio sink device (e.g. audio amplifier) to the audio output connector.

IR in

Connect an Infrared detector unit to the IR IN connector for receiving Infrared 

input signal.

IR out

Connect an Infrared emitter unit to the IR OUT connector for controlling third-

party devices over Infrared signal.

RS-232

Optionally for RS-232 extension: connect the controlled unit (e.g. 4K TV) to the 

RS-232 port of the device with a serial cable.

WARNING! 

User Ethernet is also transmitted over the SFP+ interface so be sure not to create network 

loop!

INFO: 

The HDMI input 1 port cannot accept AV signal when the device is configured as transceiver.

 

 

Summary of Contents for UBEX Series










































































































































































































Reviews:

No comments

Related manuals for UBEX Series

Directed XPRESSKIT GM9 Manual preview
XPRESSKIT GM9
Brand: Directed Pages: 16
Beper 90.435A Use Instructions preview
90.435A
Brand: Beper Pages: 28
Guntermann & Drunck DL-DVI-Vision-CAT series Installation And Operating Manual preview
DL-DVI-Vision-CAT series
Brand: Guntermann & Drunck Pages: 128
Gefen EXT-HDRS2IR-4K2K-1FO User Manual preview
EXT-HDRS2IR-4K2K-1FO
Brand: Gefen Pages: 40
Seisco SC70 Owner'S Manual preview
SC70
Brand: Seisco Pages: 20
Gastroback Design Hand Blender Advanced Pro Operating Instructions Manual preview
Design Hand Blender Advanced Pro
Brand: Gastroback Pages: 44
Lindy 38301 User Manual preview
38301
Brand: Lindy Pages: 12
TRUlink 89005 User Manual preview
89005
Brand: TRUlink Pages: 15
GE 169106 Owner'S Manual preview
169106
Brand: GE Pages: 8
GE 169053 Manual preview
169053
Brand: GE Pages: 7
GE 169099 Owner'S Manual preview
169099
Brand: GE Pages: 6
GE 169169 Owner'S Manual preview
169169
Brand: GE Pages: 18
GE G8H0AASSPSS Owner'S Manual preview
G8H0AASSPSS
Brand: GE Pages: 30
GE 169119 Owner'S Manual preview
169119
Brand: GE Pages: 6
GE 169202 Owner'S Manual preview
169202
Brand: GE Pages: 21
GE 169004R Manual preview
169004R
Brand: GE Pages: 20
GE G8BCAASSPSS Owner'S Manual preview
G8BCAASSPSS
Brand: GE Pages: 10
GE 168986 Owner'S Manual preview
168986
Brand: GE Pages: 28

Brands by name

Popular brands

Load more brands