manualshive.com logo in svg

Lightware UBEX Series, User Manual

The Lightware UBEX Series User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines for efficiently utilizing the product's features and functions. Enhance your user experience and optimize your UBEX Series device by downloading the user manual from manualshive.com.

Share
Download
background image

 

3. Installation 

UBEX series – Matrix Application Mode – User's Manual 

27

 

3. Installation 

UBEX series – Matrix Application Mode – User's Manual 

27

MA

TRIX  APPLIC

A

TION  MODE

Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2

3.4. Connections

3.4.1. F-series Endpoints - Transmitter Operation Mode

Connections for the F110 model in transmitter operation mode

Changing the Operation Mode

The operation mode of the UBEX endpoint device can be changed using the following methods.

Before

 connecting the device to the network and the MMU:

 

▪

via 

front panel LCD menu

;

After

 connecting the device to the network and the MMU:

 

▪

via 

Lightware Device Controller (LDC) software

 - see the details in the 

Device Map

 section;

 

▪

via 

LW3 protocol command

 - see the details in the 

Set the Operation Mode

 section.

For all F-series models

OPT

DAC

Connect singlemode or multimode (depends on the installed SFP+ modules) 

fiber optical cables or DAC cables between the transmitter and the Layer 3 (L3) 

network switch. The Matrix Mode is detected and applied automatically in the 

device once the MMU claims the endpoint.

HDMI in

Connect the transmitter and the source devices (e.g. PC, Blu-ray player) using 

the HDMI input 1 and 2 ports by HDMI cables.

Local HDMI out

Connect the local sink devices (e.g. monitor, 4K TV) to the HDMI output 1 and 2 

ports by HDMI cables.

Ethernet

Optionally connect the transmitter to a LAN in order to control the device.

Power

Connect the power adaptor to the AC input on the transmitter first, then to the 

AC power socket.

For F110 model only

Audio in

Connect an audio source device (e.g. media player) to the audio input connector.

Audio out

Connect an audio sink device (e.g. active speakers) to the audio output 

connector.

IR in

Connect an Infrared detector unit to the IR IN connector for receiving Infrared 

input signal.

IR out

Connect an Infrared emitter unit to the IR OUT connector for controlling third-

party devices over Infrared signal.

RS-232

Optionally for RS-232 extension: connect the controlled unit (e.g. 4K TV) to the 

RS-232 port of the device with a serial cable.

WARNING! 

User Ethernet is also transmitted over the SFP+ interface so be sure not to create network 

loop!

 

 

Summary of Contents for UBEX Series










































































































































































































Reviews:

No comments

Related manuals for UBEX Series

OBH Nordica 7603 Instruction Manual preview
7603
Brand: OBH Nordica Pages: 24
Z-Com R2 Extender Quick Installation Manual preview
R2 Extender
Brand: Z-Com Pages: 20
Hall Research Technologies Mini-Cat UH-1BTX User Manual preview
Mini-Cat UH-1BTX
Brand: Hall Research Technologies Pages: 12
Network Technologies XTENDEX ST-C6USBH-300 Operating Manual preview
XTENDEX ST-C6USBH-300
Brand: Network Technologies Pages: 15
DIPRA 002137 Original Operating Instructions preview
002137
Brand: DIPRA Pages: 73
NETGEAR Nighthawk X6S EX8000 User Manual preview
Nighthawk X6S EX8000
Brand: NETGEAR Pages: 65
HiBoost Commercial 30K Pro User Manual preview
Commercial 30K Pro
Brand: HiBoost Pages: 20
AVARRO 0E-USB2EXT Manual preview
0E-USB2EXT
Brand: AVARRO Pages: 36
Planet IPOE-E302 User Manual preview
IPOE-E302
Brand: Planet Pages: 19
Smeg 8017709264116 Quick Start Manual preview
8017709264116
Brand: Smeg Pages: 9
DS Produkte HB-01 Instruction Manual preview
HB-01
Brand: DS Produkte Pages: 28
Black & Decker BX200 User Manual preview
BX200
Brand: Black & Decker Pages: 12
Black & Decker BX500 User Manual preview
BX500
Brand: Black & Decker Pages: 8
Black & Decker BLP10600G Use And Care Book preview
BLP10600G
Brand: Black & Decker Pages: 2
Black & Decker Crush Master BL10450BK Use And Care Book preview
Crush Master BL10450BK
Brand: Black & Decker Pages: 2
Black & Decker BX180 User Manual preview
BX180
Brand: Black & Decker Pages: 15
Black & Decker Crush Master BL10450H Use And Care Book preview
Crush Master BL10450H
Brand: Black & Decker Pages: 2
Black & Decker Crush Master BL10450G series (Spanish) Instrucciones Del Usuario preview
Crush Master BL10450G series
Brand: Black & Decker Pages: 2

Brands by name

Popular brands

Load more brands