2. Product Overview
UBEX series – Matrix Application Mode – User's Manual
17
2. Product Overview
UBEX series – Matrix Application Mode – User's Manual
17
MA
TRIX APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | Applied MMU firmware package: v1.2.1 | LDC software: v1.34.0b2
Product Overview
The following sections are about the physical structure of the device, input/
output ports and connectors; software and hardware capabilities:
2.1. Front and Rear View - F-series Endpoint Devices
2.1.1. Front View
All Models
1
Status LEDs
The LEDs give immediate feedback about
the current status of the endpoint device.
See the details about the operation of the
LEDs in the
section (on the
right side).
2
LCD screen
LCD screen showing the most important
settings and parameters in the front
panel menu. The available settings and
information depends on the current
application mode. See the details in
the
Front Panel LCD Menu Operation -
3
Jog dial
control knob
Easy setting and menu navigation by the
jog dial control. Keep dialing and click while
getting feedback on the LCD.
4
Reset button
Reboots the device (the same as
disconnecting from the power source and
reconnecting again).
2
1
4
3
Status LEDs
LIVE
Transmitter / Receiver / Transceiver
blinking The device is powered and ready to use.
off
The device is not powered or out of operation.
STATUS
Transmitter / Receiver / Transceiver
on
All measured temperature and voltage values are
within the limits.
blinking Measured temperature or voltage value is out of
the limits.
off
The device is not powered or out of operation.
LINK OK
Transmitter / Receiver / Transceiver
on
The connection is established on SFP+ LINK 1
and 2 and the Link Aggregation is working.
blinking The connection is established on SFP+ LINK 1
and 2 and LACP detection period is active.
off
No connection is established on one of the SFP+
links.
MMU AVAILABLE
Transmitter / Receiver / Transceiver
on
Matrix mode is active; the communication is live
between the endpoint and the Matrix Management
Unit (MMU).
blinking Matrix mode is active; no communication between
the endpoint and the MMU.
off
Extender mode is active; no communication
between the endpoint and the MMU.
ç
Front and Rear View - F-series Endpoint Devices
ç
Front and Rear View - R-series Endpoint Devices
ç
Front and Rear View - UBEX-MMU-X200
ç
