Life technologies invitrogen Neon User Manual Download Page 9 | Manualshive

Page: 9 / 52

background image

Introduction

About the Product

Neon

™

Transfection
System

The Neon

™

Transfection System is a novel, benchtop electroporation device

that employs an electroporation technology by using the pipette tip as an
electroporation chamber to efficiently transfect mammalian cells including
primary and immortalized hematopoietic cells, stem cells, and primary cells.

The Neon

™

Transfection System efficiently delivers nucleic acids, proteins, and

siRNA into all mammalian cell types including primary and stem cells with a
high cell survival rate. The transfection is performed using as few as 1 × 10

4

or

as many as 5 × 10

6

cells per reaction using a sample volume of 10 μL or 100 μL

in a variety of cell culture formats (60 mm, 6-well, 48-well, and 24-well).

The Neon

™

Transfection System uses a single transfection kit (Neon

™

Kit) that

is compatible with various mammalian cell types including primary and stem
cells thereby avoiding the need to determine an optimal buffer for each cell
type.

The Neon

™

Transfection System offers open and transparent protocols that are

optimized for ease of use and simplicity. The Neon

™

device is preprogrammed

with one 24-well optimization protocol to optimize conditions for your nucleic
acid/siRNA and cell type, or you can program and store up to 50 cell-specific
protocols in the Neon

™

device database. Optimized protocols for many

commonly used cell types are also available on www.invitrogen.com/neon for
your convenience to maximize transfection efficiencies for your cell types.

See page 3 for details on various parts of the system.

System
Components

The Neon

™

Transfection System consists of:



Neon

™

Device

The Neon

™

device is a simple, user friendly benchtop electroporation

device that employs the pipette tip as an electroporation chamber to
efficiently transfect mammalian cells including primary and immortalized
hematopoietic cells, stem cells, and primary cells. The device is
preprogrammed with a 24-well optimization protocol and supports a
database to store up to 50 user-specified protocols. See page 3 for details.



Neon

™

Pipette Station

The Neon

™

Pipette Station is a unique component of the system and holds

the Neon

™

Pipette during electroporation and protects the user from any

electrical shock exposures. The Neon

™

Tube which has an electrode near

the bottom is inserted into the pipette station to transfer the electric field
from the electrode inside the Neon

™

Tip. See page 3 for details.



Neon

™

Kits (not supplied with the device)

The Neon

™

Kits contain the Neon

™

Tips, Neon

™

Tubes, and buffers for

electroporation. The Neon

™

Kits are available in two formats for

electroporation of 10 μL or 100 μL samples (page 38 for ordering
information). See page 3 for details on Neon

™

Tips and Tubes.

Continued on next page

1

«
...
7
8
9
10
11
...
»

Summary of Contents for invitrogen Neon





















































Reviews:

No comments

Related manuals for invitrogen Neon

Tetrix 351 AC/DC Smart FW

Brand: EWM Pages: 117

Brand: Barreto Pages: 20

Brand: Backyard Discovery Pages: 41

Brand: HABYS Pages: 16

Brand: Land Pride Pages: 36

Skid Steer Rakes SR2672

Brand: Land Pride Pages: 2

Brand: Land Pride Pages: 2

Disc Harrows DH3510

Brand: Land Pride Pages: 2

Brand: Land Pride Pages: 4

Brand: Land Pride Pages: 4

Straw Crimper CR2572

Brand: Land Pride Pages: 16

Brand: Oakworks Medical Pages: 28

Brand: H&S Pages: 42

9NP-B7524 Series

Brand: Nautilus Pages: 2

Be strong NS 700X

Brand: Nautilus Pages: 34

Brand: Nautilus Pages: 21

Brand: Rane Pages: 6

Brand: Rane Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands