Life technologies invitrogen Neon User Manual Download Page 49 | Manualshive

Page: 49 / 52

background image

Purchaser Notification,

Continued

Neon

™

Transfection
System Warranty

Invitrogen (a part of Life Technologies Corporation) warrants to the original
purchaser (“Purchaser”) that the Neon

™

Transfection System device will be free

from defects in materials and workmanship for a period of one (1) year from the
date of delivery. Invitrogen agrees, as its sole responsibility under this limited
warranty, and upon prompt notice of a defect, to replace or refund purchase
price, at its discretion, any device discovered to be defective within the warranty
period. This warranty does not include replacement or refund necessitated by
accident, abuse, neglect, misuse, unauthorized repair or modification of the
device.

In the event that Invitrogen determines that the device is in need of replacement,
this Standard Warranty includes replacement of the pipette, pipette station, or
the complete Neon

™

Transfection System (i.e. device, pipette, pipette station).

This Standard Warranty includes shipment of the device or replacement to and
from Invitrogen.

THIS WARRANTY AND THE REMEDIES SET FORTH HEREIN ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED
WARRANTIES (INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT), AND NO OTHER WARRANTIES SHALL BE
BINDING UPON LIFE TECHNOLOGIES CORPORATION. IN NO EVENT
SHALL LIFE TECHNOLOGIES CORPORATION BE LIABLE FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OR MALFUNCTION OF THIS DEVICE OR THE SYSTEM
WITH WHICH IT IS USED, EVEN IF SUCH DAMAGES COULD BE
ANTICIPATED BY LIFE TECHNOLOGIES CORPORATION.

To obtain service during the warranty period, contact Invitrogen Technical
Support for further instruction.

OUT OF WARRANTY SERVICE

Contact Invitrogen Technical Support. We will be happy to assist you by phone
at no charge. Replacement of the device or components if needed, will be billed
depending on replaced components or complete Neon

™

Transfection System.

You will also be billed for shipment of the replacement components or the
complete Neon

™

Transfection System.

Purchase of the Neon

™

Transfection System Device indicates acceptance of the

terms and conditions herein.

©2010 Life Technologies Corporation. All rights reserved.

41

«
...
47
48
49
50
51
...
»

Summary of Contents for invitrogen Neon





















































Reviews:

No comments

Related manuals for invitrogen Neon

Brand: Bard Pages: 36

Brand: Bard Pages: 2

Brand: Bard Pages: 30

Brand: Bard Peripheral Vascular Pages: 44

Brand: MADRIX Pages: 12

Brand: Narcotrend Pages: 47

Brand: T-Rex Pages: 13

Brand: Gatekeeper Pages: 8

Bure Rise & Go DB 56-309

Brand: Gate Pages: 8

Brand: Halyard Pages: 88

Brand: HALDER Pages: 2

Brand: IDS Pages: 2

Brand: OAKWORKS Pages: 2

Brand: Oakton Pages: 2

Brand: Oakton Pages: 2

Brand: O2matic Pages: 4

RIDA qLine ZG2601

Brand: R-Biopharm Pages: 23

Z9 Commercial Collection System Z9A

Brand: Yazoo/Kees Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands