Getting Started,
Continued
Database Window
Enter cell-specific protocols into the database. The database can store up to
50 cell-specific protocols.
1.
Press the power switch (located on the rear side of the unit, page vii) to
turn
ON
the Neon
™
device. The unit checks to ensure that the Neon
™
Pipette Station is connected to the device and then the start up screen is
displayed.
2.
Press
Database
button to start the database window. To scroll through the
protocols in the database, use the right/left scroll buttons near the
Database button.
The Database window shows:
Number
button: Indicates protocol number
User and Protocol
: Displays the user and protocol name
Parameters (
Voltage, Width, Pulse
): Displays the electroporation
parameter for each protocol
Function buttons (
Load, Edit, and Delete
): Used to load, edit, or delete
a protocol. The function buttons are activated only after a protocol is
selected.
Page
scroll: To scroll to next or previous page
3.
Press the desired protocol number button to edit the protocol. The selected
protocol is highlighted.
Continued on next page
9
