Life technologies invitrogen Neon User Manual Download Page 44 | Manualshive

Page: 44 / 52

background image

Safety Information

Safety

Follow the instructions in this section to ensure safe operation of the Neon

™

Transfection device. The Neon

™

Transfection System is designed to meet

EN61010-1 Safety Standards. To ensure safe, reliable operation, always operate
the Neon

™

Transfection System according to the instructions in this manual.

Failure to comply with the instructions in this manual may create a potential
safety hazard, and will void the manufacturer’s warranty and void the EN61010-
1 safety standard certification. Life Technologies is not responsible for any injury
or damage caused by use of this instrument when operated for purposes which it
is not intended. All repairs and service should be performed by Life
Technologies.



Always ensure that the power supply input voltage matches the voltage
available in your location.



For operating environment, see page 35.



This device is air-cooled so its surfaces become hot during operation. When
installing the device, leave a space of more than 10 cm (4 inches) around it.



Never insert metallic objects into the air vents of the device as this could
result in electrical shock, personal injury and equipment damage.



Always set the main switch on the power supply unit to OFF before
connecting the power cord to the wall outlet.



Always ensure that the grounding terminal of the device and that of the wall
outlet are properly connected. Connect the power cord to a grounded, 3-
conductor power outlet.



To avoid potential shock hazard, make sure that the power cord is properly
grounded.



Be sure to position the instrument such that it is easy to disconnect the unit.



Be sure to set the main switch to OFF, unplug the power cord, and secure the
pipette station before moving the device.

Continued on next page

36

«
...
42
43
44
45
46
...
»

Summary of Contents for invitrogen Neon





















































Reviews:

No comments

Related manuals for invitrogen Neon

SACE Tmax XT Series

Brand: ABB Pages: 11

Brand: Xoop Lighting Pages: 20

Brand: Vari Lite Pages: 132

Brand: B&K Pages: 16

Brand: B&G Pages: 2

Brand: Bante Instruments Pages: 6

Brand: LA Audio Pages: 9

Brand: P-Q Controls Pages: 5

Brand: Velp Scientifica Pages: 16

Brand: Velp Scientifica Pages: 2

Brand: Velp Scientifica Pages: 32

Brand: Velleman-Kit Pages: 32

Brand: Orliman Pages: 11

HomeFill HF2POST6

Brand: Invacare Pages: 24

Brand: WhizRider Pages: 24

Brand: PMK Pages: 24

Brand: SteelFlex Pages: 13

Brand: Karma Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands