Lexmark X9575, User Manual

Page: 212 / 290

D
O YOU NEED TO ALIGN THE PRINT CARTRIDGES
?
The cartridges may be out of alignment.
1
Do one of the following:
•
In Windows Vista, click
Œ
Control Panel.
•
In Windows XP or 2000, click Start .
2
Click Programs or All Programs
Œ
Lexmark 9500 Series .
3
Click Solution Center .
4
Click the Maintenance tab.
5
Click Align to fix blurry edges .
A
RE THE PRINT CARTRIDGES CLEAN
?
You may need to clean the print cartridge nozzles.
Printouts have alternating bands of light and dark print
If the printer pauses frequently during a print job and prints pages with alternating bands of light and dark print, it
is printing data faster than the computer can send it. Banded printing occurs when the printer pauses frequently.
You may need to change the printer software settings, or the problem may be that the printer and the computer are
not able to communicate properly.
A
RE THE PRINTER AND THE COMPUTER ABLE TO COMMUNICATE DATA
?
Check the printer status:
1
Do one of the following:
•
In Windows Vista, click
Œ
Control Panel.
•
In Windows XP or 2000, click Start .
2
Click Programs or All Programs
Œ
Lexmark 9500 Series .
3
Click Solution Center .
4
If the Printer Status is:
•
Cannot Communicate , the problem could be hardware or printer software settings.
•
Ready or Busy Printing , the problem may be with the printer software settings.
Transparencies or photos contain white lines
These are possible solutions. Try one or more of the following:
A
DJUST THE SETTINGS ON THE
P
RINT
S
ETUP TAB
1
With a document or photo open, click File
Œ
Print .
2
Click Properties , Preferences , Options , or Setup .
The Print Setup tab appears.
Troubleshooting
212