manualshive.com logo in svg

Lexmark M3150dn, User Manual

The Lexmark M3150dn is a high-performance laser printer designed for busy office environments. This versatile device offers exceptional printing speeds and professional-quality results. To get the most out of your printer, make sure to download the free user manual from our website for detailed instructions and troubleshooting guidance.

Share
Download
background image

3

Insert the tray.

4

From the printer control panel, select 

Next

 > 

 > 

Clear the jam, press OK

 > 

 to clear the message and continue

printing.

[x]

‑

page jam, clear manual feeder. [25y.xx]

1

From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.

Note: 

Make sure all paper fragments are removed.

2

Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.

Clearing jams

130

Summary of Contents for M3150dn





































































































































































































Reviews:

No comments

Related manuals for M3150dn

QMS 1660 Operation preview
1660
Brand: QMS Pages: 122
QMS 1660 Reference Manual preview
1660
Brand: QMS Pages: 306
Samsung SCX-3405FW Manual Del Usuario preview
SCX-3405FW
Brand: Samsung Pages: 347
Samsung SCX 6555N - MultiXpress Mono Multifunction Manual Del Usuario preview
SCX 6555N - MultiXpress Mono Multifunction
Brand: Samsung Pages: 180
Samsung SCX-4300 - SCX 4300 B/W Laser License Agreement preview
SCX-4300 - SCX 4300 B/W Laser
Brand: Samsung Pages: 18
Samsung SCX-4521FG - B/W Laser - All-in-One User Manual preview
SCX-4521FG - B/W Laser - All-in-One
Brand: Samsung Pages: 215
Samsung SCX 6320F - B/W Laser - All-in-One User Manual preview
SCX 6320F - B/W Laser - All-in-One
Brand: Samsung Pages: 332
Samsung SCX 4828FN - Laser Multi-Function Printer User Manual preview
SCX 4828FN - Laser Multi-Function Printer
Brand: Samsung Pages: 248
Samsung SCX 4725FN - B/W Laser - All-in-One User Manual preview
SCX 4725FN - B/W Laser - All-in-One
Brand: Samsung Pages: 253
Samsung ML 2851ND - B/W Laser Printer User Manual preview
ML 2851ND - B/W Laser Printer
Brand: Samsung Pages: 179
Samsung ML 2510 - B/W Laser Printer Manual Del Usuario preview
ML 2510 - B/W Laser Printer
Brand: Samsung Pages: 84
Samsung ML 1740 - B/W Laser Printer Manual Del Usuario preview
ML 1740 - B/W Laser Printer
Brand: Samsung Pages: 152
Samsung ML 1630 - B/W Laser Printer User Manual preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 142
Samsung ML 1630 - B/W Laser Printer Manual Del Usuario preview
ML 1630 - B/W Laser Printer
Brand: Samsung Pages: 82
Samsung SL-M2875FD Installation Manual preview
SL-M2875FD
Brand: Samsung Pages: 2
Samsung M337 User Manual preview
M337
Brand: Samsung Pages: 384
Samsung Lazett Combo SCX-4216F Service Manual preview
Lazett Combo SCX-4216F
Brand: Samsung Pages: 135
Samsung CLX-6260FD Manual Del Usuario preview
CLX-6260FD
Brand: Samsung Pages: 414

Brands by name

Popular brands

Load more brands