Lexmark M3150dn User Manual Download

Page: 157 / 196

Shadow images appear on prints

A B C D
A B C D

Leading edge

Trailing edge

Action

Yes

Step 1

Load paper with the correct paper type and weight in the tray.

Is paper with the correct paper type and weight loaded in the tray?

Go to step 2.

Load paper with the
correct paper type and
weight in the tray.

Step 2

From the printer control panel, set the paper type and weight in the Paper
menu to match the paper loaded in the tray.

Is the tray set to the type and weight of the paper loaded?

Go to step 3.

Change the paper
loaded in the tray to
match the paper type
and weight specified in
the tray settings.

Step 3

Depending on your operating system, specify the paper type and
weight from Printing Preferences or from the Print dialog.

Resend the print job.

Do shadow images still appear on prints?

Go to step 4.

The problem is solved.

Step 4

Replace the imaging unit, and then resend the print job.

Do shadow images still appear on prints?

Contact

customer

support

The problem is solved.

Troubleshooting

157

Summary of Contents for M3150dn





































































































































































































Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands

Lexmark M3150dn, User Manual

Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands