Lexmark M3150dn User Manual Download

Page: 165 / 196

Action

Yes

Step 6

Redistribute the toner in the imaging unit.

Remove the toner cartridge, and then the imaging unit.

Firmly shake the imaging unit.

Warning—Potential Damage:

Do not expose the imaging unit to

direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.

Install the imaging unit, and then the cartridge.

Resend the print job.

Is the print still too light?

Go to step 7.

The problem is solved.

Step 7

Replace the imaging unit, and then resend the print job.

Is the print still too light?

Contact

customer

support

The problem is solved.

Printer is printing blank pages

Action

Yes

Step 1

Check if there is packing material left on the imaging unit.

Remove the toner cartridge, and then the imaging unit.

Check if the packing material is properly removed from the imaging
unit.

Warning—Potential Damage:

Do not expose the imaging unit to

direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.

Reinstall the imaging unit, and then the cartridge.

Resend the print job.

Is the printer still printing blank pages?

Go to step 2.

The problem is solved.

Troubleshooting

165

Summary of Contents for M3150dn





































































































































































































Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands

Lexmark M3150dn, User Manual

Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands