manualshive.com logo in svg

Lexmark M3150dn, User Manual

The Lexmark M3150dn is a high-performance laser printer designed for busy office environments. This versatile device offers exceptional printing speeds and professional-quality results. To get the most out of your printer, make sure to download the free user manual from our website for detailed instructions and troubleshooting guidance.

Share
Download
background image

Industry Canada (Canada)

Cet appareil est conforme à la norme RSS-210 d'Industry Canada. Son fonctionnement est soumis aux deux conditions
suivantes :

(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles
risquant d'altérer son fonctionnement.

Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne est
strictement interdite par la réglementation d'Industry Canada.

En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement
interdite.

Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilisé à l'intérieur
et loin des fenêtres afin de garantir une protection optimale.

Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.

L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre
aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au
Code de sécurité 6 que vous pouvez consulter sur le site Web de Santé Canada www.hc-sc.gc.ca/rpb.

Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme
aux spécifications techniques d'Industry Canada.

Notice to users in the European Union

This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC,
1999/5/EC, and 2009/125/EC on the approximation and harmonization of the laws of the Member States relating to
electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, radio
equipment and telecommunications terminal equipment and on the ecodesign of energy-related products.

Compliance is indicated by the CE marking.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY, 40550 USA.
The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön fasor, Millennium
Tower III, 1095 Budapest HUNGARY, A declaration of conformity to the requirements of the Directives is available upon
request from the Authorized Representative.

This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.

Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC Council
directives 2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC on the approximation and harmonization of the
laws of the Member States relating to electromagnetic compatibility, safety of electrical equipment designed for use
within certain voltage limits and on radio equipment and telecommunications terminal equipment and on the ecodesign
of energy-related products.

Compliance is indicated by the CE marking.

Notices

184

Summary of Contents for M3150dn





































































































































































































Reviews:

No comments

Related manuals for M3150dn

Xerox 220 Quick Install Manual preview
220
Brand: Xerox Pages: 8
Oki IP-6620 Maintenance Manual preview
IP-6620
Brand: Oki Pages: 572
Oki proColor pro900DP User Manual preview
proColor pro900DP
Brand: Oki Pages: 127
Olivetti d-color MF551 Printing Manual preview
d-color MF551
Brand: Olivetti Pages: 309
OKIDATA MICROLINE 320 Quick Reference Manual preview
MICROLINE 320
Brand: OKIDATA Pages: 4
Xerox DC240 - DocuColor 240 Color Laser Quick Start Manual preview
DC240 - DocuColor 240 Color Laser
Brand: Xerox Pages: 2
Xante ColourLaser series guide Quick Reference Manual preview
ColourLaser series guide
Brand: Xante Pages: 31
Xante AW 1200 Quick Reference Manual preview
AW 1200
Brand: Xante Pages: 31
Xante Accel-a-Writer 812 Maintenance Manual preview
Accel-a-Writer 812
Brand: Xante Pages: 12
Xante Ilumina Repacking And Shipping Manual preview
Ilumina
Brand: Xante Pages: 6
Xerox C410 User Manual preview
C410
Brand: Xerox Pages: 262
Olivetti FS-529 Service Manual preview
FS-529
Brand: Olivetti Pages: 33
MAC TOOLS P 9300 Instruction Manual preview
P 9300
Brand: MAC TOOLS Pages: 2
Xerox 8200DX - Phaser Color Solid Ink Printer Manual preview
8200DX - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 2
Ricoh IM C6500 Operating Instructions Manual preview
IM C6500
Brand: Ricoh Pages: 24
Ricoh SP 213Nw Setup Manual preview
SP 213Nw
Brand: Ricoh Pages: 23
Canon PIXMA E481 Online Manual preview
PIXMA E481
Brand: Canon Pages: 776
Nexa PX-700IV Setup preview
PX-700IV
Brand: Nexa Pages: 2

Brands by name

Popular brands

Load more brands