Lexmark M3150dn User Manual Download

Page: 146 / 196

Option problems

Cannot detect internal option

Action

Yes

Step 1

Turn off the printer, then wait for about 10 seconds, and then turn on the
printer.

Does the internal option operate correctly?

The problem is solved. Go to step 2.

Step 2

Check if the internal option is properly installed in the controller board.

Turn off the printer using the power switch, and then unplug the power
cord from the electrical outlet.

Make sure the internal option is installed in the appropriate connector
in the controller board.

Connect the power cord to the printer, then to a properly grounded
electrical outlet, and then turn on the printer.

Is the internal option properly installed in the controller board?

Go to step 3.

Connect the internal
option to the controller
board.

Step 3

Print a menu settings page, and then check to see if the internal option is
listed in the Installed Features list.

Is the internal option listed in the menu settings page?

Go to step 4.

Reinstall the internal
option.

Step 4

Check if the internal option is selected.

It may be necessary to manually add the internal option in the printer
driver to make it available for print jobs. For more information, see
“Updating available options in the printer driver” on page 21.

Resend the print job.

Does the internal option operate correctly?

The problem is solved. Contact

customer

support

Troubleshooting

146

Summary of Contents for M3150dn





































































































































































































Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands

Lexmark M3150dn, User Manual

Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands