manualshive.com logo in svg

Lexmark M3150dn, User Manual

The Lexmark M3150dn is a high-performance laser printer designed for busy office environments. This versatile device offers exceptional printing speeds and professional-quality results. To get the most out of your printer, make sure to download the free user manual from our website for detailed instructions and troubleshooting guidance.

Share
Download
background image

Use

To

Network Setup Page

Print a report containing information about the network printer settings, such as
the TCP/IP address information.

Note: 

This menu item appears only in network printers or in printers connected

to print servers.

Profiles List

Print a list of profiles stored in the printer.

Note: 

This menu item appears only when LDSS is enabled.

Print Fonts

PCL Fonts
PostScript Fonts

Print a report of all the fonts available for the printer language currently set in
the printer.

Note: 

A separate list is available for PCL and PostScript emulations.

Print Directory

Print a list of all the resources stored in an optional flash memory card or printer
hard disk.

Notes:

•

Job Buffer Size must be set to 100%.

•

Make sure the optional flash memory or printer hard disk is installed
correctly and working properly.

•

This menu item appears only when a flash or disk option is installed.

Asset Report

Print a report containing printer asset information, such as serial number and
model name.

Network/Ports menu

Active NIC menu

Use

To

Active NIC

Auto
[list of available network cards]

Notes:

•

Auto is the factory default setting.

•

This menu item appears only when an optional network card is installed.

Standard Network or Network [x] menus

Note: 

Only active ports appear in this menu. All inactive ports are omitted.

Use

To

PCL SmartSwitch

On
Off

Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.

Notes:

•

On is the factory default setting.

•

When Off is used, the printer does not examine incoming data. The printer
uses PostScript emulation if PS SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if PS SmartSwitch is set to Off.

Understanding the printer menus

62

Summary of Contents for M3150dn





































































































































































































Reviews:

No comments

Related manuals for M3150dn

Oki MC560n Specifications preview
MC560n
Brand: Oki Pages: 4
Olivetti ARTJET 20 User Manual preview
ARTJET 20
Brand: Olivetti Pages: 22
Kyocera ECOSYS M8124cidn Quick Manual preview
ECOSYS M8124cidn
Brand: Kyocera Pages: 44
Oki LP470s Manual Rapide preview
LP470s
Brand: Oki Pages: 140
VuPoint IP-P20-VP User Manual preview
IP-P20-VP
Brand: VuPoint Pages: 20
Konica Minolta bizhub 215 Installation Manual preview
bizhub 215
Brand: Konica Minolta Pages: 8
Savin 4035e Copy Reference Manual preview
4035e
Brand: Savin Pages: 132
Xerox 1235/DX - Phaser Color Laser Printer Advanced Features And Troubleshooting Manual preview
1235/DX - Phaser Color Laser Printer
Brand: Xerox Pages: 144
Copystar CS 6501i Quick Manual preview
CS 6501i
Brand: Copystar Pages: 2
Printronix L1524 Setup Manual preview
L1524
Brand: Printronix Pages: 148
Lexmark 16A0310 - OptraImage 242 Setup Manual preview
16A0310 - OptraImage 242
Brand: Lexmark Pages: 207
Canon C1533P Setup Manual preview
C1533P
Brand: Canon Pages: 120
Canon Bubble Jet Pixma iX4000 Brochure & Specs preview
Bubble Jet Pixma iX4000
Brand: Canon Pages: 10
Canon Cassette Module-Y1 Service Manual preview
Cassette Module-Y1
Brand: Canon Pages: 40
Canon BJC-820 Service Manual preview
BJC-820
Brand: Canon Pages: 105
Canon CLC 3220 Network Manual preview
CLC 3220
Brand: Canon Pages: 228
Canon BJC-70 Service Manual preview
BJC-70
Brand: Canon Pages: 130
Canon BUBBLE JET S630 User Manual preview
BUBBLE JET S630
Brand: Canon Pages: 2

Brands by name

Popular brands

Load more brands