Lexmark M3150dn User Manual Download Page 143

Page: 143 / 196

Too many trays attached [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra trays.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Unformatted flash detected [53]

Try one or more of the following:

•

From the printer control panel, press

to stop the defragmentation and continue printing.

•

Format the flash memory device.

Note:

If the error message remains, then the flash memory device may be defective and need to be replaced.

Unsupported option in slot [x] [55]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the unsupported option card from the printer controller board, and then replace it with a supported card.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Weblink server not set up. Contact system administrator.

From the printer control panel, press

to clear the message.

Note:

If the message appears again, then contact your system support person.

Solving printer problems

•

“Basic printer problems” on page 144

•

“Option problems” on page 146

•

“Paper feed problems” on page 148

Troubleshooting

143

Summary of Contents for M3150dn





































































































































































































Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands

Lexmark M3150dn, User Manual

Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands