Lexmark M3150dn User Manual Download

Page: 142 / 196

SMTP server not set up. Contact system administrator.

From the printer control panel, press

to clear the message.

Note:

If the message appears again, then contact your system support person.

Standard network software error [54]

Try one or more of the following:

•

From the printer control panel, press

to confirm.

•

Unplug the router, then wait for 30 seconds, and then plug it back again.

•

Turn off the printer, and then turn it back on.

•

Update the network firmware in the printer or the print server. For more information, visit the Lexmark Web site
at

http://support.lexmark.com

Standard parallel port disabled [56]

•

From the printer control panel, press

to clear the message.

Notes:

•

The printer discards any data received through the parallel port.

•

Make sure the Parallel Buffer menu is not set to Disabled.

Standard USB port disabled [56]

Try one or more of the following:

•

From the printer control panel, press

to clear the message and continue printing.

Note:

The printer discards any data received through the USB port.

•

From the printer control panel, set USB Buffer to Auto.

Too many flash options installed [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra flash memory.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Troubleshooting

142

Summary of Contents for M3150dn





































































































































































































Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands

Lexmark M3150dn, User Manual

Search results

Summary of Contents for M3150dn

Reviews:

Related manuals for M3150dn

Brands by name

Popular brands