Lexmark M1140 User Manual Download Page 148

Page: 148 / 168

Toner specks appear on prints

Action

Yes

Replace the imaging unit, and then resend the print job.

Do toner specks appear on prints?

Contact

customer

support

The problem is solved.

Toner rubs off

Leading edge

Trailing edge

ABC

DEF

Action

Yes

Step 1

From the Paper menu on the printer control panel, check the paper type
and weight.

Do the paper type and texture match the paper loaded in the tray?

Go to step 2.

Specify the paper type
and weight from the
tray settings to match
the paper loaded in the
tray.

Step 2

Check if you are printing on paper with texture or rough finishes.

Are you printing on textured or rough paper?

From the Paper menu
on the printer control
panel, set the paper
texture.

Contact

customer

support

Uneven print density

Action

Yes

Replace the imaging unit, and then resend the print job.

Is the print density uneven?

Contact

customer

support

The problem is solved.

Troubleshooting

148

Summary of Contents for M1140









































































































































































Search results

Summary of Contents for M1140

Reviews:

Related manuals for M1140

Brands by name

Popular brands

Lexmark M1140, User Manual

Search results

Summary of Contents for M1140

Reviews:

Related manuals for M1140

Brands by name

Popular brands