Lexmark M1140 User Manual Download Page 143

Page: 143 / 168

Printer is printing solid black pages

Action

Yes

Step 1

Reinstall the imaging unit.

Remove the toner cartridge, and then the imaging unit.

Warning—Potential Damage:

Do not expose the imaging unit to

direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.

Install the imaging unit, and then the cartridge.

Resend the print job.

Is the printer printing solid black pages?

Go to step 2.

The problem is solved.

Step 2

Replace the imaging unit, and then resend the print job.

Is the printer printing solid black pages?

Contact

customer

support

The problem is solved.

Transparency print quality is poor

Action

Yes

Step 1

From the printer control panel, set the paper type in the Paper menu to
match the paper loaded in the tray.

Is the paper type for the tray set to Transparency?

Go to step 2.

Set the paper type to
Transparency.

Step 2

Check if you are using a recommended type of transparency.

Resend the print job.

Is the print quality still poor?

Contact

customer

support

The problem is solved.

Troubleshooting

143

Summary of Contents for M1140









































































































































































Search results

Summary of Contents for M1140

Reviews:

Related manuals for M1140

Brands by name

Popular brands

Lexmark M1140, User Manual

Search results

Summary of Contents for M1140

Reviews:

Related manuals for M1140

Brands by name

Popular brands