Lexmark M1140 User Manual Download Page 65

Page: 65 / 168

Use

Enable AutoIP

Yes
No

Specify the Zero Configuration Networking setting.

Note:

Yes is the factory default setting.

Enable FTP/TFTP

Yes
No

Enable the built-in FTP server, which lets you send files to the printer using File Transfer
Protocol.

Note:

Yes is the factory default setting.

Enable HTTP Server

Yes
No

Enable the built-in Web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a Web browser.

Note:

Yes is the factory default setting.

WINS Server Address

View or change the current WINS server address.

Enable DDNS

Yes
No

View or change the current DDNS setting.

Note:

Yes is the factory default setting.

Enable mDNS

Yes
No

View or change the current mDNS setting.

Note:

Yes is the factory default setting.

DNS Server Address

View or change the current DNS server address.

Backup DNS Server Address

View or change the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

Enable HTTPS

Yes
No

View or change the current HTTPS setting.

Note:

Yes is the factory default setting.

IPv6 menu

To access the menu, navigate to any of the following:

•

Network/Ports

Standard Network

Standard Network Setup

IPv6

•

Network/Ports

Network [x]

Network [x] Setup

IPv6

Note:

This menu is available only in network printers or printers connected to print servers.

Use

Enable IPv6

On
Off

Enable Internet Protocol Version Six (IPv6) in the printer.

IPv6 uses bigger numbers to create IP addresses.

Note:

On is the factory default setting.

Auto Configuration

On
Off

Specify whether or not the network adapter accepts the automatic IPv6
address configuration entries provided by a router.

Note:

On is the factory default setting.

These settings can be changed only from the Embedded Web Server.

Understanding the printer menus

Summary of Contents for M1140









































































































































































Search results

Summary of Contents for M1140

Reviews:

Related manuals for M1140

Brands by name

Popular brands

Lexmark M1140, User Manual

Search results

Summary of Contents for M1140

Reviews:

Related manuals for M1140

Brands by name

Popular brands