Lexmark M1140 User Manual Download

Page: 137 / 168

Paper curl

Action

Yes

Step 1

Move the width and length guides in the tray to the correct positions for
the size of the paper loaded.

Are the width and length guides positioned correctly?

Go to step 2.

Adjust the width and
length guides.

Step 2

From the printer control panel, set the paper type and weight in the Paper
menu to match the paper loaded in the tray.

Do the paper type and weight match the type and weight of the paper in
the tray?

Go to step 3.

Specify the paper type
and weight from the
tray settings to match
the paper loaded in the
tray.

Step 3

Depending on your operating system, specify the paper type and
weight from Printing Preferences or from the Print dialog.

Resend the print job.

Is the paper still curled?

Go to step 4.

The problem is solved.

Step 4

Remove the paper from the tray, and then turn it over.

Resend the print job.

Is the paper still curled?

Go to step 5.

The problem is solved.

Step 5

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store paper in

its original wrapper until you use it.

Resend the print job.

Is the paper still curled?

Contact

customer

support

The problem is solved.

Troubleshooting

137

Summary of Contents for M1140









































































































































































Search results

Summary of Contents for M1140

Reviews:

Related manuals for M1140

Brands by name

Popular brands

Lexmark M1140, User Manual

Search results

Summary of Contents for M1140

Reviews:

Related manuals for M1140

Brands by name

Popular brands