Lenovo ThinkSystem NE0152T Installation Manual Download Page 3

Page: 3 / 110

Contents

Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . . . 7

Safety Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Other Important Safety Notices . . . . . . . . . . . . . . . . . . . . . 13

ThinkSystem NE0152T . . . . . . . . . . . . . . . . . . . . . . 15

NE0152T Documentation . . . . . . . . . . . . . . . . . . . . . . . 16

Notices and Statements in this Document . . . . . . . . . . . . . . 16
Related Documentation . . . . . . . . . . . . . . . . . . . . . . 16

Typographic Conventions . . . . . . . . . . . . . . . . . . . . . . . 18

Switch Components . . . . . . . . . . . . . . . . . . . . . . . 19

Switch Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Management Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Micro-USB Serial Console Port . . . . . . . . . . . . . . . . . . . 21
RJ45 Management Port. . . . . . . . . . . . . . . . . . . . . . . 22

RJ45 Management LEDs . . . . . . . . . . . . . . . . . . . . 22

Reset Button   .   .   .   . .   . .   .   .   .   . .   .   .   .   . .   . .   .   .   .   . .   . .   .    22
System Status LEDs  . .   . .   .   .   .   . .   .   .   .   . .   . .   .   .   .   . .   . .   .    23
USB Port . .   .   .   .   . .   . .   .   .   .   . .   .   .   .   . .   . .   .   .   .   . .   . .   .    23

Switching Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SFP+ Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
SFP+ LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Fans .   .   . .   .   .   .   . .   . .   .   .   .   . .   .   .   .   . .   . .   .   .   .   . .   . .   .    26
Fan LEDs   .   .   .   .   . .   . .   .   .   .   . .   .   .   .   . .   . .   .   .   .   . .   . .   .    26
Power Supply    .   .   . .   . .   .   .   .   . .   .   .   .   . .   . .   .   .   .   . .   . .   .    27
Power LEDs   .   .   .   . .   . .   .   .   .   . .   .   .   .   . .   . .   .   .   .   . .   . .   .    29

Installing NE0152T Hardware and Options. . . . . . . . . . . . . . 31

Before Installing the NE0152T . . . . . . . . . . . . . . . . . . . . . 32

Installing the NE0152T in a Rack . . . . . . . . . . . . . . . . . . . . 37

Installing the NE0152T in a Standard Equipment Rack .   .   .   .   . .   . .   .    37
Installing the NE0152T in a Lenovo System x or Power Rack   .   . .   . .   .    40
Installing the NE0152T in a Lenovo iDataPlex Rack   . .   .   .   .   . .   . .   .    44
Installing the Air-Duct Option   .   .   . .   .   .   .   . .   . .   .   .   .   . .   . .   .    47

Summary of Contents for ThinkSystem NE0152T















































































































Search results

Summary of Contents for ThinkSystem NE0152T

Reviews:

Related manuals for ThinkSystem NE0152T

Brands by name

Popular brands

Lenovo ThinkSystem NE0152T, Installation Manual

Search results

Summary of Contents for ThinkSystem NE0152T

Reviews:

Related manuals for ThinkSystem NE0152T

Brands by name

Popular brands