Lenovo ThinkServer RS160 User Manual And Hardware Maintenance Manual Download Page 93

Page: 93 / 142

4. Disconnect the system fan cable from the system board. See “System board components” on page 25.

5. Press the four plastic rivets on the top of the system fan with your fingers and then lift the system

fan out of the server.

Figure 59. Removing the system fan

6. Install a new system fan. See “Installing a system fan” on page 79.

7. If you are instructed to return the old system fan, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

Installing a system fan

To install a system fan, do the following:

1. Touch the static-protective package that contains the new system fan to any unpainted surface on the

outside of the server. Then, remove the new system fan from the package.

Chapter 5

Replacing hardware

Summary of Contents for ThinkServer RS160















































































































































Search results

Summary of Contents for ThinkServer RS160

Reviews:

Related manuals for ThinkServer RS160

Brands by name

Popular brands

Lenovo ThinkServer RS160, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RS160

Reviews:

Related manuals for ThinkServer RS160

Brands by name

Popular brands