Lenovo ThinkServer RS160, User Manual And Hardware Maintenance Manual

Page: 97 / 142

Dispose of the battery as required by local ordinances or regulations.
The following statement applies to users in the state of California, U.S.A.
California Perchlorate Information:
Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate.
Perchlorate Material - special handling may apply, See
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
Removing the coin-cell battery
To remove the coin-cell battery, do the following:
1. Prepare your server. See “Preparing your server in advance” on page 47.
2. Locate the coin-cell battery. See “System board components” on page 25.
3. Remove the coin-cell battery.
Figure 63. Removing the coin-cell battery
4. Install a new coin-cell battery. See “Installing the coin-cell battery” on page 83.
5. Dispose of the failing battery as required by local ordinances or regulations.
Installing the coin-cell battery
To install a new coin-cell battery and configure the server, do the following:
1. Install the new coin-cell battery to the server.
Figure 64. Installing the coin-cell battery
2. Complete the parts replacement. See “Completing the parts replacement” on page 95.
3. Turn on the server and all attached devices.
Note: When the server is turned on for the first time after a new coin-cell battery is installed, an error
message might be displayed. This is normal after installing a new coin-cell battery.
Chapter 5
.
Replacing hardware
83