Lenovo ThinkServer RS160 User Manual And Hardware Maintenance Manual Download Page 100

Page: 100 / 142

3. Gently press the tab on the ThinkServer RAID Super Capacitor Module bracket as shown and remove

the ThinkServer RAID Super Capacitor Module from the bracket at the same time.

Figure 67. Removing the ThinkServer RAID Super Capacitor Module from the bracket

4. Gently press the two tabs on the ThinkServer RAID Super Capacitor Module bracket and remove

the bracket at the same time.

Note:

Skip this step if you are just installing a new ThinkServer RAID Super Capacitor Module instead of

both the ThinkServer RAID Super Capacitor Module and its bracket.

Figure 68. Removing the ThinkServer RAID Super Capacitor Module bracket from the chassis

ThinkServer RS160 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RS160















































































































































Search results

Summary of Contents for ThinkServer RS160

Reviews:

Related manuals for ThinkServer RS160

Brands by name

Popular brands

Lenovo ThinkServer RS160, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RS160

Reviews:

Related manuals for ThinkServer RS160

Brands by name

Popular brands