Lenovo HR650X V2, User Manual

Page: 91 / 192

Step 4. If necessary, remove the PCIe adapters that are installed on the riser card. See “Remove a PCIe
adapter” on page 79.
Step 5. Remove the riser card from the bracket.
Figure 56. Riser card removal
a. Remove the two screws that secure the riser card to the bracket.
b. Remove the riser card.
After you finish
1. If you are instructed to return the old riser card, follow all packaging instructions and use any packaging
materials that are provided.
2. Remove the rear wall bracket if needed.
Install a riser card
Use this information to install a riser card.
About this task
The riser assembly you want to install might be different from the following illustrations, but the installation
method is the same. The following takes the LPFH riser assembly as an example.
Attention:
• Read “Installation Guidelines” on page 25 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Chapter 4
.
Hardware replacement procedures
83