manualshive.com logo in svg

Lenovo 7D8T, Maintenance Manual

The Lenovo 7D8T Maintenance Manual is essential for anyone seeking in-depth information and guidelines to keep their device in top-notch condition. You can conveniently download this comprehensive manual for free from our website, providing detailed instructions and valuable insights to ensure optimal performance for your Lenovo 7D8T.

Share
Download
background image

A Lenovo optional device that worked previously does not work now. 

1.  Make sure that all of the cable connections for the device are secure. 
2.  If the device comes with test instructions, use those instructions to test the device.
3.  If the failing device is a SCSI device, make sure that: 

•  The cables for all external SCSI devices are connected correctly.
•  Any external SCSI device is turned on. You must turn on an external SCSI device before you turn on 

the server.

4.  Reseat the failing device.
5.  Replace the failing device.

Serial-device problems

See this topic to learn how to solve problems with serial ports or devices.

• 

“Number of displayed serial ports is less than the number of installed serial ports” on page 192

• 

“Serial device does not work” on page 192

Number of displayed serial ports is less than the number of installed serial ports

Complete the following steps until the problem is solved. 

1.  Make sure that: 

•  Each port is assigned a unique address in the Setup utility and none of the serial ports is disabled.
•  The serial-port adapter (if one is present) is seated correctly

2.  Reseat the serial port adapter.
3.  Replace the serial port adapter.

Serial device does not work

1.  Make sure that: 

•  The device is compatible with the server. 
•  The serial port is enabled and is assigned a unique address.
•  The device is connected to the correct connector.

2.  Reseat the following components: 

a.  Failing serial device.
b.  Serial cable.

3.  Replace the following components: 

a.  Failing serial device.
b.  Serial cable.

4.  (Trained technician only) Replace the system board.

Intermittent problems

See this section to solve intermittent problems.

• 

“Intermittent external device problems” on page 193

• 

“Intermittent KVM problems” on page 193

• 

“Intermittent unexpected reboots” on page 193

192

ThinkEdge SE450 Maintenance Manual

Summary of Contents for 7D8T



























































































































































































































Reviews:

No comments

Related manuals for 7D8T

NEC Univerge SV9300 Programming Manual preview
Univerge SV9300
Brand: NEC Pages: 47
NEC Univerge SV9100 Manual preview
Univerge SV9100
Brand: NEC Pages: 766
Xerox CX PRINT SERVER 550 User Manual preview
CX PRINT SERVER 550
Brand: Xerox Pages: 166
LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... Quick Install Manual preview
301160U - 1TB Ethernet Disk RAID Network Attached...
Brand: LaCie Pages: 5
NEC Express5800/R310e-E4 User Manual preview
Express5800/R310e-E4
Brand: NEC Pages: 86
GDC SX-2000A Series User Manual preview
SX-2000A Series
Brand: GDC Pages: 185
Moxa Technologies NPort P5250A Series Quick Installation Manual preview
NPort P5250A Series
Brand: Moxa Technologies Pages: 2
Integra NAS-2.3 Instruction Manual preview
NAS-2.3
Brand: Integra Pages: 40
HPE StoreOnce 6500 User Manual preview
StoreOnce 6500
Brand: HPE Pages: 258
Canon imagePRESS Server G200 Configuration And Setup preview
imagePRESS Server G200
Brand: Canon Pages: 98
Canon imagePRESS A3200 Installation And Service Manual preview
imagePRESS A3200
Brand: Canon Pages: 192
Canon ColorPass-Z7400 Configuration Manual preview
ColorPass-Z7400
Brand: Canon Pages: 210
Dell E74S Reference Manual preview
E74S
Brand: Dell Pages: 25
Dell EMC PowerEdge R340 Installation And Service Manual preview
EMC PowerEdge R340
Brand: Dell Pages: 92
Dell EMC PowerEdge R640 Deployment Manual preview
EMC PowerEdge R640
Brand: Dell Pages: 78
Dell E71S Reference Manual preview
E71S
Brand: Dell Pages: 25
Dell EMC PowerEdge R740 Installation And Service Manual preview
EMC PowerEdge R740
Brand: Dell Pages: 172
Dell EMC Core XC750 Installation And Service Manual preview
EMC Core XC750
Brand: Dell Pages: 186

Brands by name

Popular brands

Load more brands