Lenovo 7D8T, Maintenance Manual

Page: 131 / 218

Table 26. Cable routing for the power backplane and the intrusion switch
From To
1
Intrusion switch cable Intrusion switch Intrusion switch connector
2
Power backplane sideband cable Power backplane Power backplane sideband connector
Step 4. Power on the server. Make sure the power LED (green) is lit.
1
Power LED (green)
2
Power switch
Step 5. (If available) Hook the front end of the switch cap to the power backplane, and rotate the other end
to secure the cap; then apply the label to the power backplane.
Figure 118. Applying the switch cap and label
After this task is completed
Proceed to complete the parts replacement (see “Complete the parts replacement” on page 174 ).
Power supply replacement
See these topics to learn how to remove and install a power supply unit.
Chapter 3
.
Hardware replacement procedures
123