56
Instruction manual V3.1 02/2001
12. Optional accessories
Fig. 56.1
8
15
Fig. 56.2
13
14
14
Fuse replacement
Prior to replacing the fuses, turn the illumina-
tion off with the mains switch (8) and discon-
nect the carrier from the mains power supply!
The fuses are located in the voltage selector housing
(3).
Place the tip of a small screw driver into the small
recess of the cover and push carefully to remove.
Pull out the voltage selector housing
(13)
.
Remove the fuses
(14)
.
Use fuses of the same specification only!
For correct fuse type, see label on the carrier.
Mount new fuses of the same technical specifica-
tion.
The actual voltage setting can be seen in the small
window
(15)
of the voltage selector housing.
Insert the voltage selector housing with the fuses
into the instrument, lightly push until it locks in place.
Check if the correct voltage is indicated in window
(15)
.
Reconnect the mains plug.
Turn on with the mains switch.
Summary of Contents for RM2145
Page 2: ......
