13
Leica RM 2145 Rotary Microtome
6. Unpacking and installation
Fig. 13
1
2
4
6
5
8
3
6.1.2 Wooden shipping crate
Remove two screws
(8)
at the top and the bottom of
each of the four sides of the crate and then take off
the lid
(1)
.
Remove the foam bridge
(2)
.
Remove the side wall frame
(3)
lifting it upwards.
Take out the accessory box
(6)
.
Lift the instrument
(4)
from the foam stabilizers
(5)
on the wooden pallet, holding it at the front of the
base plate and at the recessed grip at the rear
(Fig.
12.2 - see previous page)
.
Place the instrument on a stable laboratory bench.
The instrument is equipped with two slide faces
(7, Fig.
12.2 - see previous page)
at the rear of the base plate
to facilitate repositioning on the work bench.
To move the instrument, slightly lift it at the front of
the base plate and slide it to the desired location on
the slide faces.
Summary of Contents for RM2145
Page 2: ......
