55
Leica RM 2145 Rotary Microtome
12. Optional accessories
1
2
8
4
10
9
7
Fig. 55
Do not operate the magnifier & illumination
carrier at a power rating other than specified
on the nameplate!
Connecting the mains cable and turning on
Connect the mains cable
(7)
to the socket at the rear
of the carrier.
Place the mains plug into the mains power outlet
socket.
Turn on with the mains switch
(8)
.
Carrier adjustments
The carrier
(2)
can be repositioned back and forth
on the microtome housing.
It also may be slewn to the side if required.
To do so, slightly lift the carrier at front and move
as desired.
The carrier may be adjusted in height by means of
the knob
(9)
.
The inclination angle of magnifier
(1)
can be ad-
justed as required.
Lamp replacement
Prior to replacing the lamp, turn the illumina-
tion off with the mains switch (8) and discon-
nect the carrier from the mains power supply!
Fold the magnifier
(1)
up.
Pull the lamp
(10)
out of the holder.
Use lamp of the same specification only!
Lamp type: Osram DULUX 7 W.
Lightly push the new lamp into the holder until it
locks in place.
Reconnect the carrier to the mains power supply.
Turn on with the mains switch.
Summary of Contents for RM2145
Page 2: ......
