44
Instruction manual V3.1 02/2001
6
1
4 3
7
5
2
Fig. 44.1
12. Optional accessories
12.1.5 Foil clamp - Type 2
This foil clamp is appropriate for large foil ribbons and
is mounted in the standard specimen clamp.
To open the jaws
(3)
and
(4)
lightly loosen the 3
screws
(5)
with an Allen key size 4
(6)
.
Insert the foil
(2)
from behind to position it between
the movable jaw
(3)
and the fixed jaw
(4)
.
To clamp the foil, first tighten the screw
(5)
in the
middle and then the other two screws with the Allen
key.
Place the foil clamp in the standard specimen clamp
so that the bevelled surface
(7)
on the back of the
foil clamp points to the right or left.
Turn the knurled knob
(1)
clockwise to securely
clamp the foil clamp in the standard specimen
clamp.
12.1.6 Holder for round specimens
The holder for round specimens is designed to accom-
modate cylindrical samples. Inserts for specimens of
6, 15 and 25 mm diameter are available.
To mount the required insert
(2, 3, 4)
turn the clamp-
ing ring
(1)
counterclockwise and remove.
Place the insert
(2)
,
(3)
or
(4)
in the clamping ring
(1)
and fix the clamping ring
(1)
by turning it clockwise.
To mount the specimen, turn the clamping ring
(1)
counterclockwise, mount the sample
(5)
and fix by
turning the clamping ring clockwise.
To orient the sample, put the pin
(9)
in one of the
holes
(10)
and turn counterclockwise.
To fix the orientation, put the pin
(9)
again in one of
the holes
(10)
and turn clockwise.
4
2
1
9
3
5
10
Fig. 44.2
Summary of Contents for RM2145
Page 2: ......
