52
Instruction manual V3.1 02/2001
12. Optional accessories
Fig. 52.1
3
2
1
1
12.3.4 Knife holder E-TC
The knife holder E-TC is designed for the Leica TC-65
tungsten carbide blades.
Inserting the blade
Push the knife guard
(1)
to the middle.
To insert the blade, relocate the clamping lever
(2)
down.
Carefully insert the tungsten carbide blade
(3)
from
the side with the shining facet to the front.
To clamp the blade, relocate the clamping lever
(2)
up.
Cleaning
The clamping plate
(7)
can be removed for cleaning.
To remove the blade, relocate the clamping lever
(2)
down.
Carefully remove the blade.
Pull out the clamping lever
(2)
.
Remove the clamping plate
(7)
.
Only use mild commercial detergents or soap
solution for cleaning!
Do not use solvents that contain acetone and
xylene!
Clean all components with a damp not a wet cloth.
Place the clamping plate
(7)
on the holder ensuring
that the upper edge of the clamping plate and of
the pressure plate
(5)
are parallel and at the same
height.
Insert the clamping lever
(2)
in the hole and relo-
cate it up.
7
2
Fig. 52.2
Summary of Contents for RM2145
Page 2: ......
