manualshive.com logo in svg

LeCroy DDA-3000A, Operator'S Manual

Share
Download
LeCroy DDA-3000A Operator'S Manual Download Page 21

X-Stream Operator’s Manual

 

WM-OM-E Rev I

 

 

19

 

return it to the factory. Simply provide us with your instrument serial number and ID, and the version 
number of instrument software installed. We will provide you with a unique option key that consists 
of a code to be entered through the Utilities' Options dialog to load the software option. 

Windows License Agreement 

LeCroy's agreement with Microsoft prohibits users from running software on LeCroy X-Stream 
oscilloscopes that is not relevant to measuring, analyzing, or documenting waveforms. 

End-user License Agreement For LeCroy® X-Stream Software 

IMPORTANT-READ CAREFULLY: THIS END-USER LICENSE AGREEMENT (“EULA”) IS A 
LEGAL AGREEMENT BETWEEN THE INDIVIDUAL OR ENTITY LICENSING THE SOFTWARE 
PRODUCT (“YOU” OR “YOUR”) AND LECROY CORPORATION (“LECROY”) FOR THE 
SOFTWARE PRODUCT(S) ACCOMPANYING THIS EULA, WHICH INCLUDE(S): COMPUTER 
PROGRAMS; ANY “ONLINE” OR ELECTRONIC DOCUMENTATION AND PRINTED 
MATERIALS PROVIDED BY LECROY HEREWITH (“DOCUMENTATION”); ASSOCIATED 
MEDIA; AND ANY UPDATES (AS DEFINED BELOW) (COLLECTIVELY, THE “SOFTWARE 
PRODUCT”).  BY USING AN INSTRUMENT TOGETHER WITH OR CONTAINING THE 
SOFTWARE PRODUCT, OR BY INSTALLING, COPYING, OR OTHERWISE USING THE 
SOFTWARE PRODUCT, IN WHOLE OR IN PART, YOU AGREE TO BE BOUND BY THE 
TERMS OF THIS EULA.  IF YOU DO NOT AGREE TO THE TERMS OF THIS EULA, DO NOT 
INSTALL, COPY, OR OTHERWISE USE THE SOFTWARE PRODUCT; YOU MAY RETURN 
THE SOFTWARE PRODUCT TO YOUR PLACE OF PURCHASE FOR A FULL REFUND.  IN 
ADDITION, BY INSTALLING, COPYING, OR OTHERWISE USING ANY MODIFICATIONS, 
ENHANCEMENTS, NEW VERSIONS, BUG FIXES, OR OTHER COMPONENTS OF THE 
SOFTWARE PRODUCT THAT LECROY PROVIDES TO YOU SEPARATELY AS PART OF THE 
SOFTWARE PRODUCT (“UPDATES”), YOU AGREE TO BE BOUND BY ANY ADDITIONAL 
LICENSE TERMS THAT ACCOMPANY SUCH UPDATES.  IF YOU DO NOT AGREE TO SUCH 
ADDITIONAL LICENSE TERMS, YOU MAY NOT INSTALL, COPY, OR OTHERWISE USE 
SUCH UPDATES.  

 

THE PARTIES CONFIRM THAT THIS AGREEMENT AND ALL RELATED DOCUMENTATION 
ARE AND WILL BE DRAFTED IN ENGLISH.  LES PARTIES AUX PRÉSENTÉS CONFIRMENT 
LEUR VOLONTÉ QUE CETTE CONVENTION DE MÊME QUE TOUS LES DOCUMENTS Y 
COMPRIS TOUT AVIS QUI S’Y RATTACHÉ, SOIENT REDIGÉS EN LANGUE ANGLAISE.

 

1. GRANT OF LICENSE.  

 

1.1 License Grant.  Subject to the terms and conditions of this EULA and payment of all applicable 
fees, LeCroy grants to you a nonexclusive, nontransferable license (the “License”) to: (a) operate 
the Software Product as provided or installed, in object code form, for your own internal business 
purposes, (i) for use in or with an instrument provided or manufactured by LeCroy (an “Instrument”), 
(ii) for testing your software product(s) (to be used solely by you) that are designed to operate in 
conjunction with an Instrument (“Your Software”), and (iii) make one copy for archival and back-up 
purposes; (b) make and use copies of the Documentation; provided that such copies will be used 
only in connection with your licensed use of the Software Product, and such copies may not be 
republished or distributed (either in hard copy or electronic form) to any third party; and (c) copy, 
modify, enhance and prepare derivative works (“Derivatives”) of the source code version of those 
portions of the Software Product set forth in and identified in the Documentation as “Samples” 

Summary of Contents for DDA-3000A






















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands