LeCroy 6000 SERIES, Operator'S Manual

Page: 54 / 409

Operator's Manual
52
ISSUED: October 2003 WR6K-OM-E Rev A
Note 1: If the dialog for the trace you want to annotate is currently displayed, you can touch the label button
at the bottom to display the Trace Annotation setup dialog.
Note 2: You may place a label anywhere you want on the waveform. Labels are numbered sequentially according to the
order in which they are added, and not according to their placement on the waveform.
2.
If you want to change the label's text, touch inside the Label Text field. A pop-up
keyboard appears for you to enter your text. Touch O.K. on the keyboard when you are
done. Your edited text will automatically appear in the label on the waveform.
3.
To place the label precisely, touch inside the Horizontal Pos. field and enter a horizontal
value, using the pop-up numeric keypad.
4.
To add another label, touch the Add label button. To delete a label, select the label from
the list, then touch the Remove label button.
5.
To make the labels visible, touch the View labels checkbox.
To Turn On a Channel Trace Label
Note: If you want to display each trace on its own grid automatically, enable Autogrid by touching Display in the menu
bar, then Autogrid in the drop-down menu.
1. On the front panel, press a channel select button, such as , to display the trace
label for that input channel and turn on the channel.