manualshive.com logo in svg

LeCroy 6000 SERIES, Operator'S Manual

The HP 6000 SERIES Hardware Installation Manual is your comprehensive guide to effortlessly set up and optimize your product. With easy-to-follow instructions, this manual ensures a smooth installation process and maximum performance. Download the user manual for the HP 6000 SERIES for free at manualshive.com, your one-stop destination for all your manual needs.

Share
Download
background image

 

WR6K-OM-E Rev A 

ISSUED: October 2003 

33

 

be used and transferred only as part of that single product package and may not be separated for 
use on more than one computer. 

1.3. Limitations. Except as specifically permitted in this EULA, you will not directly or indirectly (a) 
use any Confidential Information to create any software or documentation that is similar to any of 
the Software Product or Documentation; (b) encumber, transfer, rent, lease, time-share or use the 
Software Product in any service bureau arrangement; (c) copy (except for archival purposes), 
distribute, manufacture, adapt, create derivative works of, translate, localize, port or otherwise 
modify the Software Product or the Documentation; (d) permit access to the Software Product by 
any party developing, marketing or planning to develop or market any product having functionality 
similar to or competitive with the Software Product; (e) publish benchmark results relating to the 
Software Product, nor disclose Software Product features, errors or bugs to third parties; or (f) 
permit any third party to engage in any of the acts proscribed in clauses (a) through (e).  In 
jurisdictions in which transfer is permitted, notwithstanding the foregoing prohibition, transfers will 
only be effective if you transfer a copy of this EULA, as well as all copies of the Software Product, 
whereupon your right to use the Software product will terminate.  Except as described in this 
Section 1.3, You are not permitted (i) to decompile, disassemble, reverse compile, reverse 
assemble, reverse translate or otherwise reverse engineer the Software Product, (ii) to use any 
similar means to discover the source code of the Software Product or to discover the trade 
secrets in the Software Product, or (iii) to otherwise circumvent any technological measure that 
controls access to the Software Product.  You may reverse engineer or otherwise circumvent the 
technological measures protecting the Software Product for the sole purpose of identifying and 
analyzing those elements that are necessary to achieve Interoperability (the “Permitted 
Objective”) only if: (A) doing so is necessary to achieve the Permitted Objective and it does not 
constitute infringement under Title 17 of the United States Code; (B) such circumvention is 
confined to those parts of the Software Product and to such acts as are necessary to achieve the 
Permitted Objective; (C) the information to be gained thereby has not already been made readily 
available to you or has not been provided by LeCroy within a reasonable time after a written 
request by you to LeCroy to provide such information; (D) the information gained is not used for 
any purpose other than the Permitted Objective and is not disclosed to any other person except 
as may be necessary to achieve the Permitted Objective; and (E) the information obtained is not 
used (1) to create a computer program substantially similar in its expression to the Software 
Product including, but not limited to, expressions of the Software Product in other computer 
languages, or (2) for any other act restricted by LeCroy’s intellectual property rights in the 
Software Product.  “Interoperability” will have the same meaning in this EULA as defined in the 
Digital Millennium Copyright Act, 17 U.S.C. §1201(f), the ability of computer programs to 
exchange information and of such programs mutually to use the information which has been 
exchanged. 

1.4 

PRERELEASE CODE.

 Portions of the Software Product may be identified as prerelease code 

(“Prerelease Code”).  Prerelease Code is not at the level of performance and compatibility of the 
final, generally available product offering. The Prerelease Code may not operate correctly and 
may be substantially modified prior to first commercial shipment. LeCroy is not obligated to make 
this or any later version of the Prerelease Code commercially available. The License with respect 

Summary of Contents for 6000 SERIES


























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6000 SERIES

ABB S4Cplus Instruction preview
S4Cplus
Brand: ABB Pages: 86
Raymarine ST7000 Installation Instructions Manual preview
ST7000
Brand: Raymarine Pages: 55
Halyard MIC Series Instructions For Use preview
MIC Series
Brand: Halyard Pages: 4
GAME Underwater Light Show & Fountain Instructions preview
Underwater Light Show & Fountain
Brand: GAME Pages: 2
DB Industries DELTA 2 User Instructions preview
DELTA 2
Brand: DB Industries Pages: 60
vc999 K5 Operating Manual preview
K5
Brand: vc999 Pages: 55
Salsbury Industries 3700 Series Manual preview
3700 Series
Brand: Salsbury Industries Pages: 4
Panta Safe Light Solar Quick Start Manual preview
Solar
Brand: Panta Safe Light Pages: 2
Calrec OMEGA Installation Manual preview
OMEGA
Brand: Calrec Pages: 70
Nemalux LS Series Manual preview
LS Series
Brand: Nemalux Pages: 6
OBDLink LX Quick Start Manual preview
LX
Brand: OBDLink Pages: 2
unios Echo Quick Installation Manual preview
Echo
Brand: unios Pages: 2
natus ALGO 5 Installation And Assembly Instructions preview
ALGO 5
Brand: natus Pages: 20
natus Dantec Keypoint G4 Hardware Instructions For Use preview
Dantec Keypoint G4
Brand: natus Pages: 42
natus Madsen Zodiac Reference Manual preview
Madsen Zodiac
Brand: natus Pages: 149
olympia electronics GR-940/15L Quick Start Manual preview
GR-940/15L
Brand: olympia electronics Pages: 4
Raven RS1 Guidance And Steering Installation Manual preview
RS1
Brand: Raven Pages: 48
Pacific Solana Assembly Instructions Manual preview
Solana
Brand: Pacific Pages: 16

Brands by name

Popular brands

Load more brands