manualshive.com logo in svg

LeCroy 6000 SERIES, Operator'S Manual

The HP 6000 SERIES Hardware Installation Manual is your comprehensive guide to effortlessly set up and optimize your product. With easy-to-follow instructions, this manual ensures a smooth installation process and maximum performance. Download the user manual for the HP 6000 SERIES for free at manualshive.com, your one-stop destination for all your manual needs.

Share
Download
background image

Operator's Manual 

 

 

32

 

ISSUED: October 2003 

WR6K-OM-E Rev A

 

SOFTWARE PRODUCT THAT LECROY PROVIDES TO YOU SEPARATELY AS PART OF THE 
SOFTWARE PRODUCT (“UPDATES”), YOU AGREE TO BE BOUND BY ANY ADDITIONAL 
LICENSE TERMS THAT ACCOMPANY SUCH UPDATES.  IF YOU DO NOT AGREE TO SUCH 
ADDITIONAL LICENSE TERMS, YOU MAY NOT INSTALL, COPY, OR OTHERWISE USE 
SUCH UPDATES.  

 

THE PARTIES CONFIRM THAT THIS AGREEMENT AND ALL RELATED DOCUMENTATION 
ARE AND WILL BE DRAFTED IN ENGLISH.  LES PARTIES AUX PRÉSENTÉS CONFIRMENT 
LEUR VOLONTÉ QUE CETTE CONVENTION DE MÊME QUE TOUS LES DOCUMENTS Y 
COMPRIS TOUT AVIS QUI S’Y RATTACHÉ, SOIENT REDIGÉS EN LANGUE ANGLAISE.

 

1. GRANT OF LICENSE.  

 

1.1 License Grant.  Subject to the terms and conditions of this EULA and payment of all 
applicable fees, LeCroy grants to you a nonexclusive, nontransferable license (the “License”) to: 
(a) operate the Software Product as provided or installed, in object code form, for your own 
internal business purposes, (i) for use in or with an instrument provided or manufactured by 
LeCroy (an “Instrument”), (ii) for testing your software product(s) (to be used solely by you) that 
are designed to operate in conjunction with an Instrument (“Your Software”), and (iii) make one 
copy for archival and back-up purposes; (b) make and use copies of the Documentation; provided 
that such copies will be used only in connection with your licensed use of the Software Product, 
and such copies may not be republished or distributed (either in hard copy or electronic form) to 
any third party; and (c) copy, modify, enhance and prepare derivative works (“Derivatives”) of the 
source code version of those portions of the Software Product set forth in and identified in the 
Documentation as “Samples” (“Sample Code”) for the sole purposes of designing, developing, 
and testing Your Software.  If you are an entity, only one designated individual within your 
organization, as designated by you, may exercise the License; provided that additional individuals 
within your organization may assist with respect to reproducing and distributing Sample Code as 
permitted under Section 1.1(c)(ii).  LeCroy reserves all rights not expressly granted to you.  No 
license is granted hereunder for any use other than that specified herein, and no license is 
granted for any use in combination or in connection with other products or services (other than 
Instruments and Your Software) without the express prior written consent of LeCroy. The Software 
Product is licensed as a single product. Its component parts may not be separated for use by 
more than one user.  This EULA does not grant you any rights in connection with any trademarks 
or service marks of LeCroy.  The Software Product is protected by copyright laws and 
international copyright treaties, as well as other intellectual property laws and treaties. The 
Software Product is licensed, not sold.  The terms of this printed, paper EULA supersede the 
terms of any on-screen license agreement found within the Software Product. 

1.2 Upgrades. If the Software Product is labeled as an “upgrade,” (or other similar designation) 
the License will not take effect, and you will have no right to use or access the Software Product 
unless you are properly licensed to use a product identified by LeCroy as being eligible for the 
upgrade (“Underlying Product”).  A Software Product labeled as an “upgrade” replaces and/or 
supplements the Underlying Product.  You may use the resulting upgraded product only in 
accordance with the terms of this EULA. If the Software Product is an upgrade of a component of 
a package of software programs that you licensed as a single product, the Software Product may 

Summary of Contents for 6000 SERIES


























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6000 SERIES

Raymarine A series Installation And Operation Instructions Manual preview
A series
Brand: Raymarine Pages: 464
3M 701 Operator'S Manual preview
701
Brand: 3M Pages: 8
ZOLL M Series Service Manuallines preview
M Series
Brand: ZOLL Pages: 3
Landoll 2130 Operator'S Manual preview
2130
Brand: Landoll Pages: 83
JB Systems Sirius Operation Manual preview
Sirius
Brand: JB Systems Pages: 7
3B SCIENTIFIC PHYSICS 1023095 Instruction Sheet preview
1023095
Brand: 3B SCIENTIFIC PHYSICS Pages: 36
3A HEALTH CARE HAPPYNEB III Instruction Manual preview
HAPPYNEB III
Brand: 3A HEALTH CARE Pages: 16
360 Systems Short/cut 2000 Audio Editor Specification preview
Short/cut 2000 Audio Editor
Brand: 360 Systems Pages: 4
PANDROL CD100 User And Maintenance Manual preview
CD100
Brand: PANDROL Pages: 36
Badger Basket CABANA Assembly Instructions Manual preview
CABANA
Brand: Badger Basket Pages: 7
Backyard Discovery ASPEN 6515 Owner'S Manual preview
ASPEN 6515
Brand: Backyard Discovery Pages: 53
Campbell SkyVUE 8M Quick Deploy Manual preview
SkyVUE 8M
Brand: Campbell Pages: 2
Haag-Streit BM 900 Instructions For Use Manual preview
BM 900
Brand: Haag-Streit Pages: 16
Jaga OXRE.015 Service Manual preview
OXRE.015
Brand: Jaga Pages: 32
laerdal SimMan 3G Trauma Quick Setup Manual preview
SimMan 3G Trauma
Brand: laerdal Pages: 16
laerdal SimMan 3G Maintenance Manual preview
SimMan 3G
Brand: laerdal Pages: 16
laerdal SimMan Important Product Information preview
SimMan
Brand: laerdal Pages: 60
laerdal Nursing Baby Manual preview
Nursing Baby
Brand: laerdal Pages: 4

Brands by name

Popular brands

Load more brands