8. PICTURE SCREEN
66
8.6.3
Turning the Squeeze Display On and Off
To horizontally expand and display squeezed images, follow the procedure below.
This setting is valid when the input signal is SD and SIZE is set to FIT.
Regardless of the setting specified here, the picture is displayed using the OFF setting on
the CINELITE and CINEZONE displays.
Reference SIZE → 8.6.1, “Selecting the Display Size”
Procedure
Settings
ON:
Images with an aspect ratio of 4:3 are expanded horizontally and displayed
with an aspect ratio of 16:9.
OFF:
No image expansion is performed.
8.6.4
Displaying Gamut Errors
To display the locations where gamut errors, composite gamut errors, or luminance error
are occurring over the picture, follow the procedure below. If the detected value is greater
than the upper limit, a red mesh pattern indicates the error location. If the detected value is
less than the lower limit, a black mesh pattern indicates the error location.
Gamut errors are displayed if GAMUT ERROR on the STATUS menu is set to ON.
Composite gamut errors are displayed if C.GAMUT ERROR is set to ON. Luminance errors
are displayed if LUMA ERROR is set to ON. Additionally, you can use the GAMUT,
COMPOSIT GAMUT and LUMA settings on the STATUS menu to set the levels that are
used to detect errors.
Gamut errors are not displayed on the CINELITE, CINEZONE, and multi-screen displays.
Reference GAMUT ERROR, C.GAMUT ERROR, LUMA ERROR → 13.6.3, “Configuring Error Detection
Settings”
GAMUT → 13.6.5, “Configuring Gamut Error Settings”
COMPOSIT GAMUT → 13.6.6 “Configuring the Composite Gamut Error Settings”
LUMA → 13.6.8 “Configuring the Luminance Level Error Settings”
Procedure
GAMUT ERROR = DISP ON
GAMUT ERROR = DISP OFF
Figure 8-16 Displaying gamut errors
PICTURE → F•4 DISPLAY → F•4 GAMUT ERROR: DISP ON / DISP OFF
PICTURE → F•4 DISPLAY → F•3 SQUEEZE: ON / OFF