28
4. BEFORE YOU BEGIN MEASURING
4.6.5
Headphone Output
Figure 4-8 Headphone Output Jack
Of the audio signals embedded in the SDI signal, two channels selected with PHONES L CH
and PHONES R CH of the AUDIO menu are transmitted through these connectors.
Reference 14.6, “Configuring the Headphone Settings”
4.7
Function Menu Operations
Use the function menu to change the various settings.
This section explains how to operate the function menu, using the CINEZONE menu as an
example.
Figure 4-9 CINEZONE menu
● Selecting Settings
To select a setting from a list like the one shown in the figure above for
MODE, press
repeatedly to select the setting you want. The setting changes each time you press F•1.
After you stop pressing F•1, the setting is confirmed and the pop-up menu disappears.
Note that the pop-up menu may not appear in some cases (e.g., toggle setting).
● Specifying Values
To set the value of a setting like F•5 UPPER%, which is shown in the figure above, press
F•5, and then turn the function dial (F•D). You can reset most settings to their default values
by pressing the function dial (F•D).
● Control Stick Operation
You can use the control stick to move the screen on the picture display or move the cursor
on the CINELITE display. Tilt the control stick in the direction you want to move. If you press
the control stick first and then tilt, the movement will be faster.
F•1
F•1