Leader LV 5333, Instruction Manual

Page: 19 / 239

7
2. SPECIFICATIONS
2.3.2 Video Format Settings
Format Setting Mode Automatic and manual
Automatic
3G Detects the format information within the payload ID
(SMPTE ST 352) and automatically sets the format
HD, SD Determines the format from the input signal's
synchronization information and automatically sets the
format.
Manual The video signal format is set manually.
External Synchronization Set automatically from the supported formats
2.3.3 Embedded Audio Playback Format
Compliant Standard
3G, HD SMPTE ST 299
SD SMPTE ST 272
Format L-PCM
Sampling Frequency 48kHz
Quantization 24bit
Clock Generation Generated from the video clock
Synchronization All audio signals must be synchronized to the video
clock.
Phases All phases must be in-sync.
Channel Separation Select 2 groups of 8 channels each.
2.3.4 I/O Connectors
SDI Input Connectors
Connector Type BNC connector, 2 inputs (switching between A and B)
Input Impedance 75 Ω
Input Return Loss ≤ 15 dB for 5 MHz to the serial clock frequency
Maximum Input Voltage ±2V (DC + peak AC)
SDI Output Connector
Function Reclocks and transmits the selected SDI input signal
Connector Type BNC connector, 1 output
Output Impedance 75 Ω
Output Voltage 800 mVp-p ± 10%
External Sync Input(*1)
Input Signals Tri-level sync or NTSC/PAL black burst signal
Connector Type BNC connectors, 2 connectors 1 input
Input Impedance 15 kΩ passive loop-through
Input Return Loss ≤ 30 dB for 50 kHz to 30 MHz
Maximum Input Voltage ±5V (DC + peak AC)