14
2. SPECIFICATIONS
are converted to composite signals
Detection Range Upper Limit 90.0 to 135.0%
Detection Range Lower Limit -40.0 to -20.0%
Filter
1 MHz LPF,2.8MHz LPF (HD only)
(removes transient errors; can be turned on and off)
Level Error
Detects level errors in luminance and chroma signals of
SD/HD signals
Parity Error
Detects ancillary data header parity errors
Checksum Error
Detects ancillary data transmission errors
BCH Error
Detects transmission errors of embedded audio signals
in 3G/HD signals
Audio CRC Error
Detects CRC errors in channel status bits
Audio Information Detection
Detects presence of audio for each channel
Equivalent Cable Length Measurement Feature ............................................. Displays
SDI signal attenuation in terms of cable length
Supported Cables
3G, HD
LS-5CFB, 1694A
SD
L-5C2V, 8281
Display Range
3G
< 10 m, 10 to 105 m, > 105 m
HD
< 5 m, 5 to 130 m, > 130 m
SD
< 50 m, 50 to 300 m, > 300 m
Resolution
5m
Accuracy
±20m
Error Count
Up to 100000 errors
(counts only the specified errors)
Count Period
Once regardless of the number of times the same error
occurs within 1 second or 1 frame
Elapsed Time Display
Displays the elapsed time since the error count was
cleared
Event Log Display
Log Capacity
Up to 1000 events
Operation
Logs all events from start to finish
Logged Events
Errors, changes in input type, timestamps, etc.
Data Output
Data is saved as text files to a USB memory device or to
a PC or the like over an Ethernet.
Data Dump Display
3G-B-DS, HD, SD Display Format................................................................... Displays
data separated by serial data sequence or by channel
3G-B-DL Display Format
Stream 1, stream 2, or stream 1 and stream 2
simultaneously
Line Select
Displays the selected line
Sample Select
Displays from the selected sample
Jump Feature
Jumps to an EAV or SAV
Data Output
Data is saved as text files to a USB memory device or to
a PC or the like over an Ethernet.