3
2. SPECIFICATIONS
2.
SPECIFICATIONS
2.1
General
The LV 5333 is a multi SDI monitor that supports triple-rate SDI (3G, HD, and SD). It is a
small, light-weight, low-power-consuming device designed for use in video content
production sites. It features not only picture display, video signal waveform display,
vectorscope display, and audio level display but also data analysis, equivalent cable length
meter function, and frequency deviation measurement function for SDI signals. Therefore, it
can be used to accurately measure and monitor SDI signals. In addition, the LV 5333 is
standard equipped with CINELITE II, which can be used to quickly adjust the lighting at the
filming site.
2.2
Features
● Triple-rate SDI I/O
Two triple-rate-compatible (3G, HD, SD) SDI inputs (A and B) are available, and the SDI
signal of the selected input can be monitored. The SDI signal of the selected input is
serially reclocked and then output from the SDI output connector.
● TFT LCD
The LV 5333 is equipped with a 6.5 inch XGA (1024×768) color TFT LCD.
Video-signal-waveform, vectorscope, picture, audio level, and status displays can be
shown on the LCD. Multi-screen display, which shows a combination of these displays, is
also available.
● CINELITE II and CINELITE Advanced
The LV 5333 is standard-equipped with CINELITE II (CINELITE and CINEZONE) and
CINELITE Advanced, which are video signal luminance information analysis tools.
In CINELITE display, luminance information of the three points that you select with cursors
can be displayed using f Stop, percentage, or gradation values.
In CINEZONE display, the display brightness is shown using colors, making it possible to
check the luminance distribution of the whole display at a glance. This makes it easy to
verify gradation of dark areas as well as overexposure and underexposure.
The CINELITE Advanced feature makes it possible to synchronize measurements with
CINELITE, video signal waveform display, and vectorscope display.
● Equivalent Cable Length Measurement
The attenuation of the input SDI signal is displayed in terms of a 75 Ω coaxial cable length.
This can be used to check the transmission system margin.
● Frequency Deviation Measurement
The deviation in the SDI signal sampling frequency can be measured. This can be used to
verify the deviations in the field frequency and frame frequency.
● Stereo Headphone Output and Digital Audio Output
The LV 5333 can separate the embedded audio from the SDI signal and output the two
specified channels in stereo to the headphone output connector and digital audio output
connector.
