Configuration with the PC
Logic
zirkon Configuration Manual
V 1.2
67/ 148
When using the logic functions, the labels (variables)
should be assigned very carefully and logically from the
beginning. Later changes are very labour-intensive and
leads often to configuration errors.
The control inputs labelled here are all displayed as green
fields, and control signals can be assigned to each of them
via tree-selection. The outputs, in turn, are manifest in the
tree-selection as signals. Thus, they do not appear in the
tree-definition.
It is also possible to connect control outputs of logic
functions to control inputs of further logic functions. This
allows to establish combinations.
The configuration programme does not request with
regard
to
loops
when
programming.
Thus,
the
programming requires taking care and preventing loops.
This applies also for the control of external devices that
are for example linked via GPIO.
The following table lists all logic functions:
OR 8:(4)
The OR gate offers the control inputs In 1-8. Check boxes
allow the function Neg for negativing every input.
Furthermore, there is the function Pulse. It generates a
pulse with the length of 32.5 msec when a rising edge
occurs at the input.
As control outputs, the normal OR (Out) is offered, as well
as the negated signal (nOut).
Example:
Note