Configuration with the PC
Software update
96/ 148
V 1.2
zirkon Configuration Manual
Software update
In case of a software update (not: configuration update) of
the system, the configuration software offers the function
of the download of system files.
Before the update
Save your zirkon system files before replacing the files of
the system software. Save the existing system files in the
program directory (e. g. c:\programme\zirkon)
Example:
zdsp.rbf –> zdsp_021022.rbf (date is here 22.10.02)
ticker.bin –> ticker_021022.bin
dspprg.dsp –> dspprg_021022.dsp
Update
Attention!
Never update when the target system is on-air or used in
another way!
During an update the system repeatedly carries out a
reset which disturbs the smooth programme flow.
For carrying out a software update it needs to copy the
new
files into
the
programme
directory
(e.
g.
c:\programme\zirkon).
You find the commands for the update in the menu
“Download” of the zirkon configuration software. The
commands are “System”, “DSP” and “FPGA”. A full
update can only be guaranteed when all commands have
been carried out.
For a successful update you should leave the system
alone while the system files are transferred. After the
message “SENDING Restart” you should leave the system
alone further 30 seconds as possibly initialisations are
being carried out!
1.
Select in the menu “Download” the command
“System”!
A protection request “Transmit File” opens!
2.
Confirm the protection request with “Yes”!
Tip!!
Tip
