Configuration with the PC
Configuring the I/O cards
42/ 148
V 1.2
zirkon Configuration Manual
The name of the source In 1/1 is copied to In 1/2 and
extended by”L” or “R”.
You can continue using the signals as mono signals in the
configuration.
LINE IN card
The parameters of the LINE IN card correspond to those
of the AES IN card.
This card type offers only four inputs, though. As they are
mono inputs they are named IN 1, IN 2, IN 3 and IN 4.
MIC LINE IN card
The MIC/LINE Karte Typ 941/52 offers, like the LINE IN
card, four analogue inputs. Additional parameters are:
Checkbox for Mic:
1.
Click into the box next to “MIC” to set a check mark!
When the check mark is set the input can be used for
microphones (> 2,4 kOhm, v=0-70 dB, 48 V and high pass
filter).
When the check mark is
not
set the interface works as LINE
input (R = 5,9 kOhm).
Analog Offset Gain:
Here you can set a fix pre-amplification on the analogue
side.
Note
