Configuration with the PC
GPI/O network
90/ 148
V 1.2
zirkon Configuration Manual
TCP Link
On this page you configure the communication channels
via Ethernet-TCP/IP for which the zirkon works as “client”
Under “Active TCP Connection 1-8 you enter the TCP/IP
address at which the “server” is available. The server
must be within the same IP address range as the zirkon
system.
Under “Mode” you enter the setting used by the zirkon to
register with the “server”:
Mode: ASF
This mode offers a link with the error message server. The
software is available as an option.
GPI/O network
With the GPI/O network it is possible to network different
zirkon and Nova17 systems via Ethernet TCP/IP-networks.
Control signals (logic and level) are transferred via this
link.
With the networking of different systems via Ethernet-
TCP/IP the systems must be connected via Ethernet-
switch(es) or routers.
With the networking via hubs all data packages reach the
mixing consoles and matrix systems. This slows down at
least the transfer speed. Large data quantities in the net
(e. g. when copying files) it may happen that data is
