Configuration with the PC
GPI/O network
94/ 148
V 1.2
zirkon Configuration Manual
5.
Using the outputs “Level Send” you can transfer
input elements of the type level (potentiometers,
VCA inputs).
In order to keep the quantity of transfer data small it is
recommended to assign an input element level or a
control signal only once to a level send or GPO. They can
be distributed at the receiver’s side.
Establishing receivers
Every system can be sender and receiver of several ports
at the same time. For availability of the signals within the
system you proceed as follows:
1.
Enter the TCP/IP address of the sender into the
system definition (see “Establish networks!).
2.
Add a new element of the type NET in the same way
as for the sender.
3.
Fill in the name.
4.
Insert the port number corresponding with the
sender.
