Configuration with the PC
Connect/Routing
zirkon Configuration Manual
V 1.2
63/ 148
The crosspoint is established. The displayed window opens.
4.
Enter a label into the top line!
The line “In” is the argument for performing the audio
connect.
5.
Double-click on the green field next to “In”!
A tree selection for control signals opens.
6.
Assign a control signal!
A positive edge triggers the establishing of a connect.
7.
Assign the audio input and output signal in the
bottom lines by double-click!
Here applies the following relation: Audio In 1 is connected
with Audio Out 1 and Audio In 2 is connected with Audio Out
2.
A “Default Audio” defined for an output is cancelled. A
reset to the „Default Audio“ must be carried out by a new
connect.
Functions best suited for this action are PRIO or
BUTTON16, which are described in the chapter “Logic”.
