Configuration with the PC
Default Audio
zirkon Configuration Manual
V 1.2
59/ 148
Default Audio
As you have already defined the input signals and sums
you can now define the audio outputs in the system unit.
Supply also outputs without defined output signal (e. g.
PPM or main out). Only then you can test the present
programming status at the zirkon.
Downloading the configuration
Before downloading first test the link with the zirkon
system (see “Check connections”)
When the system confirms you proceed as follows:
1.
Select form the menu “Download” the option
“Config”!
The displayed window opens.
2.
Click on “Execute” to start the download!
The progress bar shows the progress of the process.
3.
“Cancel” aborts the process!
4.
Open the window “Setup Console”!
