Proline Kryomats
79 / 137
7.10
Timer function
Using the timer function, the thermostat can carry out an action at a certain time or after a certain waiting period. The
actions are: switching on the thermostat, entering the standby mode or one of the 5 programs in the programmer.
Command
Clock
Timer 1
Timer 2
Open the device parameter menu via the soft
key Menu .
With the cursor keys continue to:
Clock
Timer 1
,
or to
Timer 2
,
with the menu
Status
the selected timer is
switched
off
or
on
.
The standby key does not stop the timer!
Please exercise caution when thermostat is in standby mode. (
A previously activated timer mode could unintentionally start the thermostat again from the standby
mode.
The menu
Function
is used to define when an
action is executed:
Similar to an electronic mains
timer,
Weekplan
enables two switching events
to be carried out each day. The cycle is
repeated after 7 days.
Time absolute
defines a time and a date on
which a once-only action (switching event)
occurs. The time point is set with
Set time
and
with
Set date
.
Time relative
defines a waiting period after
which a once-only action occurs. With
Set
time
up to 99h: 59min can be entered. ("Set
date" is masked out with this function
selection).
If the
Weekplan
is activated, in this window
only
Status
,
Function
and
Weekplan
are
displayed.
Pump Menu
End
T
set
T
fix
Set time
Set date
Timer 1
Timer 2
Format of date
Pump
Settings
Graph
Clock
Programmer
Interfaces
Control
Limits
Pump Menu
End
T
set
T
fix
Weekplan
Time absolute
Time relative
Status
Function
Action
Set Time
Set Date
